#Flir lepton 3 manual
#Flir lepton 3 pro
#Flir lepton 3 software

This button also reinitializes thermal Spot and Absolute scales to default values, as well as visible and thermal images blending. Tap “RESET THERMAL SETTINGS” on the bottom of the page to reset preferences. Refers to the thermal radiation originating from objects which reflect off the measurement target.Īdapt reference values to a specific target to improve the accuracy of your measurements. Reflected temperature (-273° C to 1 000° C DV: 20° C) Emissivity values range from 0.0 to 1.0: the emissivity of highly polished metallic surfaces seldom exceeds 0.10 the emissivity of the surface of a perfect black body is 1.0. Refers to the ability of surfaces to emit thermal (infra-red) radiation. VERY HIGH TEMPERATURES (Low-Gain) mode is recommended for scenes between 140° C and 400° C.

#Flir lepton 3 manual

If you select the MANUAL mode, note that the application will periodically remind you to calibrate your thermal camera, through the dedicated button of your HUD.ĭEFAULT (High-Gain) mode is recommended for scenes between - 10° C and 140° C. Tap an item option, use “” and “+” or “–” to change values.

The Thermal preferences deal with specific thermography settings. Tap a box to select it and access its items.įor all items, default values (DV) are marked in bold characters.

Preferences enable you to fine-tune your ANAFI Thermal drone to your hand – to customize it, to fit your piloting and filming styles.Īccess Preferences submenus from the boxes on the left of the screen.

Size (w x l x h): 10.50 x 12.70 x 7.Access FreeFlight 6 preferences through the icon on the extreme right of the top bar of the homepage, or that of the HUD.

Output Format: User-selectable 14-bit, 8-bit (AGC applied), or 24-bit RGB (AGC and colorization applied).

Scene Dynamic Range - High Gain Mode: -10° to +140☌ Low Gain Mode: -10° to +400☌ (at room temperature), -10° to +450☌ (typical).

Radiometric Accuracy - High Gain Mode: Greater of +/- 5☌ or 5% (typical) Low Gain Mode: Greater of +/- 10☌ or 10% (typical).

the addition of the Movidius Myriad 2 gives it sudo cp flir-lepton-00A0.

Spectral Range: 8 - 14 microns (nominal) Long Wave Infrared (LWIR) Step 3 So we manually aligned the visible-thermal image pairs and end up with.

Compact form-factor ready to be embedded into production systems.

DFU over USB using a JST-SR port to USB cable, or a modified USB cable and the through holes.

#Flir lepton 3 software

Works with GetThermal - our custom open source thermal video display software for macOS and Linux with radiometric support.

Open source reference firmware: GroupGets PureThermal Github.

#Flir lepton 3 pro

The PTMini Pro also features four mounting holes, less complex circuitry, and perhaps best of all, USB DFU. It can has multiple connection options such as solder straight to the board or a custom cable using the molex port.

STM32F412 ARM microprocessor - execute on-board image processing without need for an external system PureThermal Mini Pro is a hackable thermal webcam for the FLIR Lepton (2.x - 3.x) LWIR camera core.

9 Hz color video over usb using the USB UVC class.

Compatible with all production FLIR Leptons, including radiometric 2.5 and 3.5 cores.

The radiometric Lepton captures accurate, calibrated, and noncontact temperature data in every pixel of each image. Using focal plane arrays of either 160x120 or 80圆0 active pixels, Lepton easily integrates into native mobile-devices and other electronics as an IR sensor or thermal imager. The FLIR Lepton® is a radiometric-capable LWIR camera solution that is smaller than a dime, fits inside a smartphone, and is one tenth the cost of traditional IR cameras. For developers, its reference firmware and viewer software are open source. Just like its PureThermal 2 predecessor, it ships pre-configured to operate as a plug-and-play UVC 1.0 USB thermal webcam that will work with standard webcam and video apps on all major platforms using a JST-SR to USB Cable, or your own custom cable.

The new PureThermal Mini Pro JST-SR with Thermal by FLIR is a hackable thermal camera for the FLIR Lepton thermal imaging camera core.